Ceiling Fan Switch
The most common ceiling fan parts are switches, motors, mounting brackets, capacitors and pulls, just to name a few.
Aside from the blades, the most common part which will need replacing is the ceiling fan switch It is tends to break more often due to the pressure and pulling it usually gets. In addition the light switch may stop working over time, and you may be faced with the task of replacing it.
With simple tools you can replace the ceiling fans. Turn the power off. Make sure that you turn the main power off before you start replacing the light switch. De-activate the device that cuts off the circuit. Better yet, remove the fuse controlling the power of the room.
2. Dismantle the bulbs. After you locate the pull chain, use some tape to indicate which one it is. When you take out the light fixture you will find it much less confusing to locate the fan control switch. Take out the shades and light bulbs by loosening the screws that can be found at the base of each shade.
3. Take out the ballast cover. The ballast cover has light bulbs fixed to it. Take extra care when unscrewing and lowering it. the wrap should not be pull powerfully since it is connected to the ceiling fan
4. Remove the light fixture. Detach the fan from the light fixture by making use of the plastic wire harness connecting all the wires of the ceiling fan to the wires of the light fixture. Press down the release lever so that the wire harness will separate, and place it on a table. Next, locate the light switch inside the fixture and be sure to avoid the fan switch that you had marked with a tape.
5. Exchange the broken switch. Take the ballast cover cap off and remove the switch which needs changing. Take note of the colors of the wires going into the fan light switch, and ensure that they match the colors of the wires coming out of the new ones.
Unscrew the wire nuts connecting every pair of wire from the old switch to detach them. Match one pair at a time, then connect the wires to the new light fixture switch. effect a clockwise direction, notion the nasty ends of the wires therefore fix the wire issue. To firmly place it, rotate it in clockwise direction. You can do the same with any sets of wires that are the same color.
6. Reassemble. All of your function is done. Put the light switch in the ballast cover then put the threaded end through the hole. The cap that holds the light chain insert the pull chain in that cap. From the light fixture to the fan, reconnect the wires.
Replace the screws on the ballast cover, and put the bulbs back in place.
Lastly, turn the fuse back on so as to test your light switch.
Should you need to find new replacement parts for your ceiling fan, you can find great fan switch choices online. It is important to be careful if you are doing the installation yourself and you should call an electrician if you are not certain of how to do it safely.
To find more information on this topic you can find it at Ceiling Fan Switch – which helps people find the best information for The Best Ceiling Fan Switch and ceiling fans parts
